There’s a lot of debate around using leaning mirrors on dressers.
Some people love them, while others think they’re a safety hazard. However, leaning mirrors are an extremely popular design choice, so it’s no wonder that there’s a lot of confusion about how they work.
Let’s take a closer look at leaning mirrors and how to use them safely.
How to Secure Leaning Mirror on Dresser?
Place an Anti-slip Pad Underneath the Slanted Mirror
Under the leaning mirror, place a non-slip pad.
This is a common practice, and it’s effective. The non-slip pad keeps the top of the dresser from moving.
However, it doesn’t stop the mirror from falling. If the dresser is accidentally bumped, the inclined mirror falls.
If the mirror is bumped hard enough, it can crash onto the floor. This can result in injuries and property damage.
You could just wish to dispose of the anti-slip pad.
You perhaps should buy an anti-slip pad that’s thick enough. A thick pad won’t move.
The thicker the pad, the more stability it provides. But this isn’t the safest method.
If the top of the dresser is bumped, the pad might be pushed aside. The dresser can fall, and the inclined mirror can crash to the floor.
It does, however, serve to secure your slanted mirror.
You can leave the pad in place and forget about it. If the mirror does fall, it’s not going to crash to the floor.
It will slide, and the pads will slide with it. This is safe, but it’s far from an ideal solution.
This is excellent for individuals who don’t want to deal with a slanted mirror. In cases like this, it’s a safer option than leaving the mirror attached to the dresser.
Install a Leaning Mirror on the Anchor
You will now return the leaning mirror to the dresser.
Place the mirror on top of the dresser, using the anchor point. This is the safest method for attaching a leaning mirror to a dresser.
The anchor prevents the dresser from moving. It can’t fall, and it can’t slide.
When you attach the mirror to the anchor, you’re securing it. It can’t move.
Remember that you don’t want to jut out the anchor point.
If you make the anchor stick out too far, it might snag on the clothes. You can anchor the leaning mirror to the middle of the dresser.
This is also a safe option. You can anchor the leaning mirror to the side of the dresser.
This is not recommended. If the dresser is bumped, it can slide to the side.
The mirror can fall, which could result in serious injuries. This will not result in any form of injury.
Don’t anchor it to the sides of the dresser.
Instead, anchor it to the middle of the dresser. Secure a Leaning Mirror on Dresser by Drilling Holes in Wall This is the best way to secure a mirror on a dresser.
Drill holes in the wall, attach the anchor, then hang the leaning mirror. Don’t rely on the anti-slip pad.
Secure the Leaning with Hardware
Hardware is an amazing item.
It holds everything together. It keeps everything in place.
It keeps everything stable. And it keeps everything safe.
And it doesn’t fail you. Hardware is something you can rely on.
You can use it over and over. And it doesn’t matter where you put it.
Hardware can be in your home, in your office, in your workshop (or garage), and anywhere else.
In general, the hardware used to connect a slopped mirror to a dresser is the hardware used to fasten the mirror to the dresser.
Secure a Leaning Mirror on Dresser with Hardware For securing the leaning mirror to a dresser, hardware is required.
Hardware isn’t used to keep the leaning mirror in place. Instead, it is used to keep the dresser in place.
Make a Hole in the Wall
Set the leaning mirror aside, and use an electric drill to make a hole in the wall.
You will use a drill to create a hole, then insert the hardware.
This is one of the safest ways to secure a leaning mirror to a dresser. Drill the hole.
Then insert the anchor. Don’t use a drill.
Instead, use a hammer. This is the safest method for anchoring a leaning mirror to a dresser.
This is where the hook is inserted.
Depending on what is available, 2 or 3 hooks can be used.
Hooks are used to hold the mirror in place. However, they are not used to secure the dresser.
The hardware used to secure the dresser is placed somewhere else. Hang the mirror.
Insert the hooks, then hang the mirror. Thread the bolt through the holes in the hooks.
Turn the bolt with a wrench. This is the safest way to attach a leaning mirror to a dresser.
Make a Mark on the Wall for an Anchor Point
To install a leaning mirror, you need to mark the spot where the anchor will be placed.
Use a tape measure to determine the distance from the anchor point to the mirror. Use a marker to mark this point on the wall.
Drill an Anchor Point in the Wall Now that you’ve marked the wall, and you can drill the anchor point. You can use an electric drill.
This is the point at which 2 hooks will be inserted.
A hole is drilled, then the anchor is inserted. Now, you can hang the mirror.
Connect the Hardware to the Mirror. Using the hardware that is connected to the mirror, you can attach the mirror to the anchor.
Use the bolts and nuts to connect them. Thread the bolt through the hook, then through the nut.
Tighten the nut. In general, you want to ensure that the anchor (where the screws are inserted) has at least 1/4 inch of drywall or plaster.
To accomplish this correctly, position the leaning mirror in a location that does not have any obstructions.
Mark it on the wall with a pencil, and then mark the wall with pencil where you will drill the hole.
This is where you will drill 1/4 inch holes for the wall anchors.
Also Read: Is My Floor Mirror Too Short?
Making Use of Wood and Screws
- Cut two 4 foot lengths of 1/2 inch plywood. Set this aside for now. Attach the 2 pieces of plywood together. Screw the pieces together. Measure out the distance where the leaning mirror will be, and mark that spot with a pencil. Take one of the 1/2 inch plywood pieces, and position it (mark the spot), and screw it to the wall.
- Now, connect half of the vertical length of the strip to 1/2 inch plywood.
- Then, take a measurement of the length of the vertical strip, and cut the other piece of 1/2 inch plywood to that measurement.
- On the back of the 1/2 inch plywood, drill a large enough hole for the cord to go through.
- Then, on the back of 1/2 inch plywood, attach the vertical piece with the screws.
- Now connect the mirror frame (which you purchased) to the vertical piece, using the adhesive that came with the mirror.
- Finally, your mirror is secure, and (almost) ready to hang.
Final Words
These are the finest methods that we have found for hanging mirrors.
Create an anchor point on the wall by marking two spots where you want the mirror to hang.
Drill a hole in the wall where the marks is.
This will guarantee that the leaning effect is as stable as possible.
Use hardware to secure your mirror to the dresser.
The mirror won’t fall. Don’t rely on an anti-slip pad.
The pad will only keep the base of the mirror in place. It won’t keep it from tipping.
Take your time if possible when hanging your mirror.
This will enable you to confirm that you’re satisfied with the position.
These particulars make all the difference when it comes to hanging mirrors.
